------------------------------------- Release notes for Repute 1.5 Update 4 ------------------------------------- Release date: 20/06/2007 This file records the changes made to Repute 1.5.3 from Repute 1.5.4 Š2002-7 Geocentrix Ltd. All rights reserved. "Geocentrix" is a registered trademark and "Repute" a trademark of Geocentrix Ltd. Release: -------- Repute 1.5.4 (Build 1.5.4.706). Issues fixed in this release ---------------------------- 1254 Increase limit on undrained strength of clay soils to 2000kPa to allow for modelling of weak rock 1252 Warning that piles are raked towards each other is not triggered when both piles rake in the same direction 1251 Results notebook should switch to Messages page after re-opening an existing project 1250 Program does not restore correct active load case on re-opening a saved project 1249 Error reading file '/.xml' when attempting to display load vs displacement graph 1248 Error message Degrees of Freedom (DoF) = 6000 < DoF needed = 1464 1246 pgn files should be associated with the PGroupN icon, not the Repute icon 1245 No progress messages and no movement of progress bar while running PGroupN 1242 RPX extension is not associated with Repute 1.5 (RPT extension is) 1237 The hyperbolic base factor must be between 0.0 and 0.99. Value entered = 0.99 1068 Provide feedback message when file has been opened 1067 Revision is always shown as 'A' on Project page Feature requests ---------------- 1235 Include load case number on all output reports 1158 Add ability to save messages to disk or clipboard 1153 Add comment to help file about maximum pile diameter for which field tests corroborate boundary element analysis 1150 Provide allowance in calculations to embed pile caps (i.e. below ground surface) 1149 Suggest calculate end-bearing on basis of soil properties over depth 5D below pile base 1144 Add ability to kill PGroupN process from within Repute 1097 Add header and/or footer to graph prinouts (using DevEx control) Known issues ------------ 1240 Webpages alway display in Internet Explorer 7 even when Program Options > Browser is set to Internal 1233 Help file says undrained strength of clays 'must be between and 300 kPa' but I can enter up to 600 kPa 1154 Axial load increases significantly near bottom of all piles in a group subject to large step in stiffness above the pile base 1152 Group shadowing effect should take account of pile rake 1102 On restoring the program, its height is stretched 1089 Help system has no "What's new in 1.5 page" 1088 Browse sequence doesn't work in help file 1081 Show details of progress of HDD_Install 1080 HDD_install takes a long time to complete, even in a fast machine Program files in this release: ------------------------------ File marked * have changed or are new in this release *ENGINEERING.DLL (Build 3.1.1.706) *GEOCENTRIX.DLL (Build 3.1.3.706) *GEOCENTRIXREGISTRY.DLL (Build 3.1.1.706) *GEOCENTRIXUI.DLL (Build 3.1.2.706) MRU.ini (dated 29/06/06) *PGROUPN.DLL (Build 1.5.4.706) PGROUPN2000.EXE (Build 1.7.1.607) PGROUPN4000.EXE (Build 1.7.1.607) PGROUPN6000.EXE (Build 1.7.1.607) PGROUPN8000.EXE (Build 1.7.1.607) *PLATFORM.DLL (Build 3.1.3.706) *PROJECT.DLL (Build 3.1.1.706) *REPUTE.DLL (Build 1.5.4.706) *REPUTE1_5.EXE (Build 1.5.4.706) REPUTE1_5.EXE.MANIFEST (dated 29/06/06) REPUTE1_5.LIC (dated 19/07/06) REPUTE1.LOG (dated 29/06/06) BORLNDMM.DLL (version 5.0.5.62) CC3260MT.DLL (version 6.0.1.0) RTL60.BPL (version 6.0.6.243) STLPMT45.DLL (dated 30/01/03) VCL60.BPL (version 6.0.6.240) *VCLX60.BPL (version 6.0.6.163) HASP_WINDOWS.DLL (version 1.10.0.0) X257CR61.BPL (dated 17/10/02) GENERATED\ README.TXT (dated 19/07/2006) HELP\ REPUTE.CHM (dated 12/01/2007) MANUALS\ CHANGES.TXT (dated 18/07/2006) REPUTE 1.5 REFERENCE MANUAL.PDF (dated 18/07/2006) REPUTE 1.5 USER MANUAL.PDF (dated 18/07/2006) PROJECTS\ BENCHMARKS\ BASILE-LINEAR(2003).RPX (25/07/2003) BASILE-NON-LINEAR(2003).RPX (25/07/2003) BRIAUD(1989).RPX (25/07/2003) DAVISSON-SALLEY(1970).RPX (17/09/2003) HAUNG(2001).RPX (25/07/2003) ONEILL(2001).RPX (25/07/2003) PIGLET EXAMPLE 2(1 IN 4 RAKE, 2M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(1 IN 4 RAKE, 3M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(1 IN 6 RAKE, 2M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(1 IN 6 RAKE, 3M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(1 IN 8 RAKE, 2M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(1 IN 8 RAKE, 3M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(NO RAKE, 2M SPACING).RPX (17/09/2003) PIGLET EXAMPLE 2(NO RAKE, 3M SPACING).RPX (17/09/2003) POULOS-DAVIS(1980).RPX (25/07/2003) TOMLINSON(1994).RPX (03/04/2003) EXAMPLES\ 2D-LINEAR.PGN (dated 27/04/2002) 2D-NON-LINEAR.PGN (dated 27/04/2002) 3D-LINEAR.PGN (dated 27/04/2002) 3D-NON-LINEAR.PGN (dated 27/04/2002) 2D-LINEAR.PGN (dated 27/04/2002) PGROUPN\ SAMPLE1.PGN (dated 09/09/2002) SAMPLE2.PGN (dated 26/07/2002) TUTORIAL 1\ STEP1.RPX STEP2.RPX STEP3.RPX STEP4.RPX STEP6.RPX (all dated 24/05/2004) TUTORIAL 2\ STEP1.RPX STEP2.RPX STEP3.RPX STEP4.RPX STEP6.RPX STEP8.RPX (all dated 24/05/2004) TUTORIAL 3\ STEP1.RPX STEP2.RPX STEP3.RPX STEP4.RPX TUTORIAL1.RPX (all dated 24/05/2005) RELEASE NOTES\ *README.RTF (dated 20/06/2007) REPUTE150B1.TXT (dated 06/04/2006) REPUTE150B2.TXT (dated 10/04/2006) REPUTE150B3.TXT (dated 16/05/2006) REPUTE150RC1.TXT (dated 10/07/2006) REPUTE150.TXT (dated 19/07/2006) REPUTE151.TXT (dated 29/09/2006) REPUTE152.TXT (dated 12/01/2007) REPUTE153.TXT (dated 24/05/2007) *REPUTE154.TXT (dated 20/06/2007) REPORTS\ GEOCENTRIX.GIF (dated 10/05/2005) REPUTE.CSS (dated 11/10/2002) REPUTE-COMMON.XML (dated 24/09/2002) REPUTE-COMMON.XSLT (dated 12/01/2007) REPUTE-LOGO.GIF (dated 27/08/2002) REPUTE-SIGN-CONVENTION.GIF (dated 10/10/2002) REPUTE-WELCOME.HTML (dated 11/01/2007) DETAILED\ ALL-OUTPUT.XSLT (dated 12/01/2007) PILE GROUP FLEXIBILITIES.XSLT (dated 17/05/2007) PILE GROUP STIFFNESSES.XSLT (dated 17/05/2007) PILE LOADS.XSLT (dated 18/05/2007) PILE STRESSES.XSLT (dated 17/05/2007) SUMMARY\ ALL-INPUT.XSLT (dated 12/01/2007) COMMON-INPUT.XSLT (dated 12/01/2007) KEY RESULTS.XSLT (dated 17/01/2007) LAYER-INPUT.XSLT (dated 12/01/2007) LOAD-INPUT.XSLT (dated 12/01/2007) OPTION-INPUT.XSLT (dated 12/01/2007) PILE-INPUT.XSLT (dated 12/01/2007) PROJECT-INPUT.XSLT (dated 12/01/2007) -------------------- End of release notes --------------------